Planet Technology Network Card WNL U553 User Manual

Wireless USB Adapter  
WNL-U553  
Quick Installation Guide  
 
Thank you for purchasing PLANET Wireless USB Adapter, WNL-  
U553. In this installation guide, the illustrations included driver  
and utility installing steps for Windows 2000/XP and Vista. For  
more information, please also refer to the User’s manual.  
 
Package Content  
1 x WL-U553 Wireless USB Adapter  
1 x USB Cable  
1 x Quick Installation Guide  
1 x CD-ROM (Including User’s Manual and Driver)  
 
Software Installation  
Please do NOT insert WNL-U553 to PC’s USB port  
before installing utility.  
Note  
1. Insert Drivers and User’s manual CD to your CD drive, then a  
welcome web will appear.  
2. Please click the utility hyper link to start install driver and  
utility. If the web screen doesn’t appear, please click the  
“Start” and choose “Run. When dialog box appears, enter  
“E:\Utility\setup.exe.  
3. When this screen appears, please press “Next” to continue.  
 
4. Installation will start copy driver and utility to your OS.  
5. When this dialog box appear, please click “Continue Anyway.  
 
6. Please click “Finish” to complete the installation.  
 
Hardware Installation  
1. Please connect WNL-U553 to your PC’s USB port. If your PC’s  
USB interface is not USB 2.0, Windows will prompt you there  
is a “High-Speed USB Device Plugged into non-High-Speed  
USB hub. Please don’t worry about this and keep installing.  
2. After properly connect the WNL-U553 to your PC, Windows  
will detect WNL-U553 and show you this dialog box. You can  
see the device name in this dialog box. If the device name is  
correct, please press ”Next” to the driver installation.  
 
3. Windows may show you this driver is not passed Windows  
Logo test, please select “Continue Anyway” to continue.  
4. After the driver installation complete appears. Please click  
“Finish.  
 
Configure WNL-U553 wireless settings  
In Windows XP / 2000, when wireless card installed, the built-  
in wireless utility will take control your wireless card. You may  
need to disable this utility when you would like to use WNL-  
U553 utility.  
1. Please double click the wireless utility icon  
on the bottom-  
right of desktop. Then you will see the Windows Zero Config  
Service dialog box, please click “Advanced” button. When  
the below screen appear, please disable “Use Windows to  
configure my wireless network settings” and press “OK.  
10  
 
2. Please double click the icon  
again. The WNL-U553 utility  
will appear. Please select “Site Survey” option. Select the AP  
from the AP list and press “Connect” to connect the selected  
AP. If the AP you would like to connect is not in the list,  
please press “Refresh” to search again.  
3. For more detail settings, please refer to the User’s manual to  
configure.  
11  
 
Further Configuration  
For detail configuration, please check user’s manual on the  
bundled CD.  
If you have any other questions, please contact the dealer  
where you purchased this product or you can contact PLANET  
directly at the following email address: [email protected]w  
12  
 

Pentax Digital Camera OptioV20 User Manual
Philips Car Stereo System MCM765 User Manual
Philips Cell Phone CT1898 User Manual
Philips DVD Player PBDV1668B User Manual
Philips Work Light TL D 90 User Manual
Polaroid Portable DVD Player PDM 0714 User Manual
Polar Refrigerator G596 User Manual
Poulan Cultivator 545212825 User Manual
ProForm Treadmill 831247451 User Manual
ProForm Treadmill PFTL79190 User Manual